Xhorse Condor XC-MINI Key cutting machine cut Nissan NSN14 key Jul 25th, 2016   [viewed 23 times]
Here is the instruction on cutting Nissan NSN14 key with original Xhorse Condor XC-MINI automotive key cutting machine.
There are 3 ways to make keys with Condor MINI key cutting machine. Here adapts the 3rd way: “Cut by Bitting” with an existing the original key.
Power on the machine
Select “Cut by Bitting”
 
Select the Blank key “NSN14”, Press “Confirm”
 
Select key type and confirm
 
Click on “Key Decode” button. The found bitting and Clamp M1 to be used will display on the screen, Click on “Confirm”
 
Verify bitting and modify bitting, click “Cut”
 
Start key cutting
 
Change the key
Put a new Blank Key in the proper position of the clamp.
 
Press “Direct processing”
 
Cut key in progress
 
Take out the new key
Compare original key and new key. The left one is the new key, it is a little different in size, it works.
 
Test the new key.
 Key Cutting Machine
site: http://www.uobdii.com/wholesale/ikeycutter-condor-xc-mini.html